Project
Item No.
Quantity
VIB3870-1, VIB3870-2,
VIB3870-3
®
In-Vent conveyor oven ventilation hood system.
All data is shown per oven section, unless otherwise indicated.
Single, Double, Triple
In-Vent® Hood System
EXTERIOR CONSTRUCTION
„ Stainless steel exterior on front, sides, and ducts
„ Integral exhaust and make-up air plenum and duct collar assembly
„ Quick release duct fittings and duct extensions
„ Front air make-up cooling panels
„ Cooling fan motor exhaust plenum
„ Conveyor entrance/exit end exhaust plenums
„ Heat shields over end exhaust plenums and vertical exhaust corner riser
„ Stainless steel ceiling trim pieces included
INTERIOR CONSTRUCTION
„ Aluminized steel, 300 and/or 400 series stainless steel
„ Insulated supply ducting
OPERATION
„ Captures smoke, contaminants and cooking by-products emanating from
the oven.
„ Minimizes amount of tempered air removed from kitchen by surrounding
itself and oven with a layer of untempered make-up air.
„ Requires much less exhaust and make-up air flow than conventional
overhead hoods.
„ Exhausts grease and smoke from directly over conveyors resulting in
cleaner oven and environment.
„ Cooler surfaces lower radiant heat to room and increase operator safety
and comfort significantly
STANDARD FEATURES
„ Available in three configurations
‰ VIB3870-1 for single MT3870 oven
‰ VIB3870-2 for double stacked MT3870 ovens
‰ VIB3870-3 for triple stacked MT3870 ovens
„ Fully detachable panels without tools
„ Quick disconnect ducting for servicing or cleaning
„ Adds only 4" to front-to-back dimensions
„ Ventilation system controls can be interlocked with the oven’s controls
„ Modular design for easier handling and cleaning
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
‰ Installation
BLODGETT OVEN COMPANY
1400 Toastmaster Drive, Elgin, IL USA 60120 • Phone: (847) 741-3300 • Fax: (847) 741-0015
|